Pontas de Temperatura

	80T-150U Universal Temperature Probe for air, surface, and non-corrosive liquids. Range: -50 ºC to + 150 ºC, or –58 ºF to 320 ºF Output: 1 mV per ºC or ºF Accuracy: ±1 ºC (1.8 ºF) 0 ºC to 100 ºC
	80T-IR Non-Contact Infrared Temperature Probe for hazardous to touch, moving, easily contaminated, or difficult to reach surfaces. Range: -18 ºC to +260 ºC, or 0 ºF to 500 ºF Output: 1 mV per ºC or ºF Accuracy: ±3% (+3 digits) of reading
	80TK Thermocouple Module for K-Type thermocouples with connector Range: -50 ºC to +1000 ºC, or –58 ºF to 1832 ºF Output: 1 mV per ºC or ºF Accuracy: 0.5% ±2 ºC, or 0.5% ±3.6 ºF

80T-150U Universal Temperature Probe -50° C to +150° C

The 80T-150U is a universal temperature probe designed to provide the ScopeMeter test tools with temperature measuring capability. Intended for air, surface, and non-corrosive liquids, the probe provides direct temperature conversion of 1 mV DC per degree. A three-position switch on the unit acts as a power switch and is used for selecting Celsius or Fahrenheit scaling for the output. Operating power for the 80T-150U is derived from a standard 9 volt battery.

Temperature Range: -50ºC to + 150ºC, or -58ºF to 320ºF, cable 70ºC maximum
Sensitivity: 1 mV per ºC or ºF
Resolution: 0.1ºC or 0.1ºF on the 200 mV range of a 3 1/2 -digit DMM
Ambient Temperature Range of Unit: 0ºC to +50ºC or 32ºF to 122ºF
Relative Humidity: 90%, non condensing from 0ºC to +35ºC
Accuracy: (including nominal 0.25% voltmeter error, in +15ºC to +35ºC ambient) ±1ºC (1.8ºF) 0ºC to 100ºC, decreasing linearly to ±3ºC (5.4ºF) at -50ºC and +150ºC

80T-IR Non-Contact Infrared Temperature Probe

The Fluke 80T-IR Infrared Temperature Probe is a non-contact temperature measurement accessory probe which converts infrared light emitted by an object into a 1 mV DC per ºC or ºF signal. The infra-red probe has a selection switch for direct reading of temperature in ºC or ºF

Specification

Temperature Range: -18ºC to 260ºC (0ºF to 500ºF)
Accuracy: ±3% of reading or ±3ºC (±5ºF), whichever is greater, 18ºC to 28ºC (64ºF to 82ºF) ambient operating temperature
Temperature Coefficient: 0.2% of reading or ±0.2ºC (±0.3ºF), whichever is greater, change in accuracy per degree change in ambient temperature above 28ºC (82ºF) or below 18ºC (64ºF)
Response Time: 1 second
Emissivity: Fixed at .95
Output: 1 mV per ºC or ºF (Switchable)
Operating Temperature: 0ºC to 65ºC (32ºF to 150ºF)
Resolution: 1ºC or ºF

Optical Resolution: 4:1 distance to target ratio
Power: 9V Alkaline battery, included
Battery Life: 50 hours (automatic shut off after 10 minutes)
Ambient Temperature Range of Unit: 0ºC to +65ºC, or 32ºF to 150ºF
Size: (L x W x H) 180mm x 30mm x 50mm (7.1" x 1.2" x 2")
Weight: 180g (6.4 oz)
Warranty: 1 Year
Compatibility: ScopeMeter and any DMM with 10 Mohm input impedance, standard diameter banana jacks, and mV dc capability.

80TK Thermocouple Module

Optional probes for 80TK
80CK-M Male Mini Connectors
80PK-1 K-Type General Purpose Probe
80PK-2A K-Type Immersion Probe
80PK-3A K-Type Surface Probe
80PK-4A K-Type Air Probe
80PK-5A K-Type Piercing Probe
80PK-6A K-Type Exposed Probe
80PK-7 K-Type Industrial Surface Probe
80PK-8 K-Type Pipe Clamp Probe
80PK-IR Non-Contact Infrared Temperature Probe

The Fluke 80TK thermocouple module is a low cost temperature measurement accessory which converts the output from a Type K thermocouple into 1 mV per ºC or ºF signal. A bead thermo-couple with connector is included (80PK-1). A three position switch on the module acts as power switch and for selecting Celsius or Fahrenheit scaling for the output. Operating power is derived from a standard 9 volt battery (included).
Temperature Range: -50ºC to +1000ºC, or -58ºF to 1832ºF depending on thermocouple probe used.
Celsius Fahrenheit Selection: Switch selected
Sensitivity: 1 mV per ºC or ºF
Ambient Temperature Range of Unit: 0ºC to +50ºC, or 32ºF to 122ºF

Accuracy
-50ºC to -20ºC: 2.5% ± 2ºC -20ºC to 350ºC: 0.5% ± 2ºC 350ºC to 500ºC: 1.75% ± 2ºC 500ºC to 1000ºC: 2% ± 2ºC	-58ºF to -4.0ºF: 2.5% ± 3.6ºF -40ºF to 662ºF: 0.5% ± 3.6ºF 662ºF to 932ºF: 1.75% ± 3.6ºF 932ºF to 1832ºF: 2% ± 3.6ºF

80CK-M Male Mini Connectors (Type-K)

Package of two male mini-connectors for use with Fluke 80TK or Fluke 50 Series. Isothermal screw terminals for attachment of Type-K thermocouple wire. Accepts a maximum size of 20-gauge thermocouple wire. Full 1-year warranty.

80PK-1 K-Type General Purpose Probe

(Requires 80TK)
This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion.)
80PK-1 is compatible with K-type thermometers; 80PJ-1 works with J-Type thermometers
Measurement range: -40 to 260ºC (-40 to 500ºF)

80PK-2A K-Type Immersion Probe

K-Type Immersion Probe - 80PK-2A Use as a general-purpose probe including liquids and gels.
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Compatible with K-Type temperature measuring instruments
Measurement range: -40 to 982ºC (-40 to 1800ºF)

80PK-3A K-Type Surface Probe

Designed for measuring the temperature of flat or slightly convex surfaces, this K type probe is ideal for hot rollers and plates.
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Exposed junction allows direct contact with the surface being measured
Measurement range: 0 to 260ºC (32 to 500ºF)

80PK-4A K-Type Air Probe

For air and non-caustic gas applications.
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Probe constructed of 304 stainless steel with a perforated baffle around the measurement bead
Measurement range: -40 to 816ºC (-40 to 1500ºF)

80PK-5A K-Type Piercing Probe

Made of 316 stainless steel suitable for food service. Also suitable for liquids and gels. Restrictions: The 316 stainless steel cannot be exposed to halides or sulfides. Measurement range: -196ºC to 816ºC (-320ºF to 1500ºF). Compatible with the 80TK (for use with DMM’s) and with the 51/52 Digital Thermometers and with other measuring instruments that accept mini-connectors.
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)

80PK-6A K-Type Exposed Probe

Use both as a surface probe and for insertion into air and non-corrosive gases
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Probe made of 304 stainless steel
Measurement range: -40 to 816ºC (-40 to 1500ºF)

80PK-7 K-Type Industrial Surface Probe

For flat or slightly curved surfaces
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Exposed junction allows direct contact with the surface being measured
Robust design for extended service life
Measurement range: -127 to 600ºC (-196ºF to 1112ºF)

80PK-8 K-Type Pipe Clamp Temperature Probe

Designed for pipe surfaces from 6.4 mm (1/4") diameter to 34.9 mm (1-3/8") diameter.
(Requires 80TK Thermocouple Module | Requires 80AK Thermocouple Adapter for 170.)
Spring-action jaw will not loosen over time, ensuring repeatable measurements
Robust design for extended service life
Measurement range: -29ºC to 149ºC (-20ºF to 300ºF)
Repeatability: 0.56ºC (1ºF)

80PK-IR Non-Contact Infrared Temperature Probe

Requires 80TK Thermocouple Module

• Senses infrared energy emitted by an object.
• Instant, highly repeatable readings.
• Measurement range: -18 to 260°C (0 to 500° F).
• Automatic shut-off after 10 minutes extends battery life.